Epoxy Floor Coatings Supply Fullerton, CA

Industrial Floor Coatings

Built on the Novolac technology, our Eco-Floor products are 100% solids and formulated with a rubber additive, which provides outstanding impact resistance and wear resistance. Eco-Floor all-purpose coatings can effectively weather-proof and chemical-proof any surface. It can protect any metal or concrete surfaces against corrosive substances such as gasoline, alkalis, and sewage. Several of our Eco-Floor products are FDA-approved for food-handling areas. Our service area includes Industrial and Commercial Epoxy Floor Coating.

Great For Garage Floors

Example applications for anti-corrosive epoxy coatings:

Before:

Constructions Systems Supply Industrial Floor Coatings epoxy_floor_before_rsz

After:

Constructions Systems Supply Industrial Floor Coatings epoxy_floor_after_rsz
  • Service bays, garage floors, automotive showrooms, and airplane hangars
  • Food processing plants, Supermarkets, food service areas
  • Warehouses
  • Breweries
  • Tank liners (for solutions up to 98% sulphuric acid)
  • Any manufacturing and industrial areas, where there is high traffic for heavy machinery such as forklifts.

Repair Grout and Eco-floor 1500 Coating

box-imageThis quick setting epoxy-based floor coating is not only affordable, Eco-Floor 1500 has also been proven to exhibit high UV stability, excellent tensile, elongation, and compressive strength. Furthermore, it can also provide an impressive impact and wear resistance property due to its 100% solids polymer composition. It can be applied to a wide range of surfaces such as food processing plants, garages, showrooms, and believe it or not, even airplane hangars. The clear option is an excellent topcoat for stained concrete. Lastly, its sole distributor and manufacturer, Construction Systems Supply, has acquired a food-grade accreditation from no less than the FDA.

SC-1100

box-imageThis pure solid low viscosity primer is a quick setting concrete sealer. Applying concrete sealers during winter and cold weather can reduce the effectiveness of the product; hence, we formulated SC-1100 to address exactly that product by increasing its cure rate. SC-1100 Fast Set is a 100% solids, low viscosity hybrid Novolac epoxy primers designed for deep penetration and sealing of concrete surfaces. This primer can reduce vapors that can cause bubbles on the concrete coating. With its low vapor emission of <10 lbs, tests done using Anhydrous Calcium Chloride has shown that the product can be applied on concrete surfaces that were only poured seven days prior.

Eco-floor SC3300

box-imageThis state-of-the-art ceramic coating is perfect for cement and metal floors thanks to its heavy-duty and tough formulation. It can protect any floor that receives intense amounts of stress and chemical spillage such as service garage floors, aircraft hangars, driveways, and automotive showrooms. Eco-floor SC3300 provides protection against corrosive materials such as gasoline, diesel and other petroleum products, thus making it suitable for industrial, chemical and secondary containment areas. In addition, this polymer coating serves as an excellent tank liner for solutions up to 98% sulphuric acid.

Crystal Loc

box-imageThis water-based concrete penetrating sealer is specially formulated to waterproof, damp proof, seal, and keep the natural appearance and profile of Portland cement-based concrete, concrete blocks, mortar, gunnite, slabs, floors, subsurface vaults, basements, walls, roofs, pillars, pipe, sculpture, architectural structures, and statuary. Crystal Loc works best on structures where post-construction damage is not due to engineering and construction flaws.

Selecting the Best Industrial Floor Coating

Both epoxy-based and polyurethane-based floor coating are both used to protect surfaces. Hence, as a business owner or manufacturer, you are probably wondering which one is best for your shop floor. Contrary to what the general population believes, both products have distinct features and properties. Understanding these differences will help ensure you pick the best industrial floor coating for the job at hand.[/ImageWithContent]

Most industrial coatings can be bought as a two-part mixture, meaning you will be provided with the two of the main ingredients of the product separately. This type of coating is best whether you are using epoxy or polyurethane coating.

The Two Part Epoxy Advantage

One advantage of two-part floor coatings over ambient air-cured coating products is that they provide a stronger hold on surfaces. To understand how a two-part floor coating works, you first have to look at what is going on at the microscopic level of the floor surface.

Consider the example of an existing aged concrete floor that has been prepped to receive a new epoxy floor coating. When mixed and applied properly, the epoxy coating seeps into the porous concrete surface about 1/16th of an inch. The chemical reaction caused by mixing the epoxy resin (part 1) with the hardening agent (part 2) results in a curing process that hardens the coating and “welds” it to the concrete floor.

{If you were to saw out a 1’x1’ section of a concrete floor coated with a two-part epoxy resin, you would see with the naked eye where the floor coating infused itself into the concrete about 1/16th of an inch. By cutting the concrete floor in half, one can observe how deep the two-part floor coating has penetrated the surface.} This is why two-part industrial epoxy coatings work so well.

However, you must be careful in buying epoxy or polyurethane-based floor coating as, although some manufacturers would claim that they can do just as well, you can only achieve the same results with two-part coatings. The problem with pre-mixed epoxy products is that, although they make your job a bit faster, they tend to lose the ability to chemically-bond with the surface as they no longer cure on the stop. They may make a surface harder, but will not be as durable as a two-part floor coating a system.

Polyurethane Coatings vs. Epoxy Floor Coatings

Epoxy-based coatings have been proven to provide better adhesion and chemical-proofing than polyurethane coatings. Nevertheless, both products can turn any surface scratch-proof in the same span of waiting time. Polyurethane coatings, on the other hand, have been shown to display stronger anti-UV properties compared to epoxy based coating. However, this advantage comes with a major drawback. Surfaces applied with polyurethane coating are more prone to damage due to its softer character.

Hence, with its stronger binding, weather-proofing, and damage-proofing properties, epoxy-based floor coatings are a better alternative for industrial and commercial floors that receive heavy beatings on a daily basis.

Construction System Supply’s Eco-Floor industrial epoxy floor coatings are 100% solids and are the ideal types of two-part coatings that this article presents. They are formulated with rubber additives for added impact and wear resistance. You can rest assured that any surface you apply Construction System Supply’s floor coatings to will resist the strongest and most corrosive substances.

Let us help you decide on the perfect epoxy floor coating for your industrial needs by getting in touch with us through our website www.csscorp.net! Serving Fullerton CA and surrounding areas!