Epoxy Floor Coatings Supply Grantsboro, NC

Industrial Floor Coatings

To provide excellent anti-impact ability and resistance to wear and tear, we built our Eco-Floor solutions from 100% solids. Our formula includes a rubber additive and is created using Novolac Technology. Ideal for a wide variety of concrete and metal surfaces, these high-performance industrial and commercial epoxy floor coatings can be applied to damp surfaces and are resistant to gasoline, sewage, alkalis, and other corrosive substances. The Food and Drug Administration has deemed many of our products to be food –grade. This accreditation means that our customers can apply it even in areas where food products are handled. Our service area includes Industrial and Commercial Epoxy Floor Coating.

Great For Garage Floors

Example applications for anti-corrosive epoxy coatings:

Before:

Constructions Systems Supply Industrial Floor Coatings epoxy_floor_before_rsz

After:

Constructions Systems Supply Industrial Floor Coatings epoxy_floor_after_rsz
  • Service bays, garage floors, automotive showrooms, and airplane hangars
  • Supermarkets, food service areas, food processing plants
  • Warehouses
  • Breweries
  • Tank liners (for solutions up to 98% sulphuric acid)
  • All manufacturing and industrial facility floors, including areas with high-traffic and heavy equipment such as forklifts

Eco-floor 1500 Coating and Repair Grout

box-imageThis quick setting epoxy-based floor coating is not only affordable, Eco-Floor 1500 has also been proven to exhibit high UV stability, excellent tensile, elongation, and compressive strength. Furthermore, it can also provide an impressive impact and wear resistance property due to its 100% solids polymer composition. It can be applied to a wide range of surfaces such as food processing plants, garages, showrooms, and believe it or not, even airplane hangars. The clear option is an excellent topcoat for stained concrete. FDA-approved for food-handling areas. Mfg., distributed and sold exclusively by Construction Systems Supply.

SC-1100

box-imageSC-1100 Fast Set is a 100% solids low viscosity primer designed for sealing concrete. Applying concrete sealers during winter and cold weather can reduce the effectiveness of the product; hence, we formulated SC-1100 to address exactly that product by increasing its cure rate. SC-1100 Fast Set is a 100% solids, low viscosity hybrid Novolac epoxy primers designed for deep penetration and sealing of concrete surfaces. SC-1100 Fast Set helps eliminate outgassing and bubbles. SC-1100 Fast Set can be applied to green concrete as young as seven days based on ASTM F1869-10 with a moisture vapor emission of <10lbs.

Eco-floor SC3300

box-imageA durable, tough, ceramic coating, Eco-Floor 3300 is engineered for concrete and metal floors requiring superior long-term chemical resistance such as aircraft hangars, service garage floors, driveways, and automotive showrooms. Eco-floor SC3300 provides protection against corrosive materials such as gasoline, diesel and other petroleum products, thus making it suitable for industrial, chemical and secondary containment areas. Lastly, extremely acidic chemical containers for various chemicals such as sulfur can last longer when lined with it.

Crystal Loc

box-imageThis water-based concrete penetrating sealer is specially formulated to waterproof, damp proof, seal, and keep the natural appearance and profile of Portland cement-based concrete, concrete blocks, mortar, gunnite, slabs, floors, subsurface vaults, basements, walls, roofs, pillars, pipe, sculpture, architectural structures, and statuary. Use Crystal Lok on concrete in any location where the seepage is not caused by cracking or other structural flaws.

Selecting the Best Industrial Floor Coating

If you are a commercial business or manufacturer looking for a protective coating for your shop floor, you may be considering whether to use an. While epoxy coatings and polyurethane coatings are sometimes talked about interchangeably in online discussion forums, they are two different types of floor coatings with distinctly different properties. Understanding these differences will help ensure you pick the best industrial floor coating for the job at hand.[/ImageWithContent]

Regardless of whether you decide to go with an epoxy coating or a polyurethane coating, you’ll want to be sure the industrial coating you select is a two-part floor coating (meaning it is sold in two separate parts that must be mixed together).

The Two Part Epoxy Advantage

Two-part floor coatings have a distinct advantage over ambient air-cured coating products, in that they offer superior bonding characteristics. The amazing properties of two-part floor coating can only be understood by diving into how its molecules work.

Let us take a look at how this type of coating works by examining its effects on an existing old concrete floor that has been primed to be rebuffed with a new epoxy coating. If used correctly, the epoxy coating can be expected to penetrate the concrete surface by as much as 1/16th of an inch. The chemical reaction caused by mixing the epoxy resin (part 1) with the hardening agent (part 2) results in a curing process that hardens the coating and “welds” it to the concrete floor.

{If you were to saw out a 1’x1’ section of a concrete floor coated with a two-part epoxy resin, you would see with the naked eye where the floor coating infused itself into the concrete about 1/16th of an inch. By cutting the concrete floor in half, one can observe how deep the two-part floor coating has penetrated the surface.} This deep penetration is the reason why most experts recommend it over other types of floor coatings.

Keep in mind that while many floor coating paints and products may claim to contain, if they are not two-part products you will not get the best results. The problem with pre-mixed epoxy products is that, although they make your job a bit faster, they tend to lose the ability to chemically-bond with the surface as they no longer cure on the stop. They may make a surface harder, but will not be as durable as a two-part floor coating a system.

Polyurethane Coatings vs. Epoxy Floor Coatings

Epoxy-based coatings have been proven to provide better adhesion and chemical-proofing than polyurethane coatings. Both types of industrial floor coatings are resistant to abrasions and have relatively similar cure times. Polyurethane coatings, on the other hand, have been shown to display stronger anti-UV properties compared to epoxy based coating. However, this advantage comes with a major drawback. Surfaces applied with polyurethane coating are more prone to damage due to its softer character.

Because of their superior adhesion, water and chemical resistant properties, and resistance to gouging, epoxy floor coatings are the best choice for coating industrial floors, and commercial floors where heavy machinery is in use and durability is a concern.

Construction System Supply’s Eco-Floor industrial epoxy floor coatings are 100% solids and are the ideal types of two-part coatings that this article presents. They are formulated with rubber additives for added impact and wear resistance. These high-performance coatings are resistant to alkalis, gasoline, and other corrosive substances.

Contact Construction Systems Supply today for assistance in selecting the best epoxy floor coating for your industrial flooring needs! www.csscorp.net Serving Grantsboro NC and surrounding areas!