Epoxy Floor Coatings Supply Jersey City, NJ

Industrial Floor Coatings

Built on the Novolac technology, our Eco-Floor products are 100% solids and formulated with a rubber additive, which provides outstanding impact resistance and wear resistance. Eco-Floor all-purpose coatings can effectively weather-proof and chemical-proof any surface. It can protect any metal or concrete surfaces against corrosive substances such as gasoline, alkalis, and sewage. Several of our Eco-Floor products are FDA-approved for food-handling areas. We offer a wide variety of epoxy-based floor coating including industrial and commercial applications.

Great For Garage Floors

Example applications for anti-corrosive epoxy coatings:

Before:

Constructions Systems Supply Industrial Floor Coatings epoxy_floor_before_rsz

After:

Constructions Systems Supply Industrial Floor Coatings epoxy_floor_after_rsz
  • Airplane hangars, automotive showrooms, garage floors, and service bays
  • Supermarkets, food service areas, food processing plants
  • Warehouses
  • Breweries
  • Tank liners (for solutions up to 98% sulphuric acid)
  • All manufacturing and industrial facility floors, including areas with high-traffic and heavy equipment such as forklifts

Repair Grout and Eco-floor 1500 Coating

box-imageThis quick setting epoxy-based floor coating is not only affordable, Eco-Floor 1500 has also been proven to exhibit high UV stability, excellent tensile, elongation, and compressive strength. Furthermore, it can also provide an impressive impact and wear resistance property due to its 100% solids polymer composition. It can be applied to a wide range of surfaces such as food processing plants, garages, showrooms, and believe it or not, even airplane hangars. The clear option is an excellent topcoat for stained concrete. FDA-approved for food-handling areas. Mfg., distributed and sold exclusively by Construction Systems Supply.

SC-1100

box-imageThis pure solid low viscosity primer is a quick setting concrete sealer. Its fast cure rate makes it ideal for cold weather applications. SC-1100 Fast Set has been created with deep penetration for concrete surfaces in mind. Thus, to make it one of the best low-viscosity hybrid Novolac epoxy primers, it is carefully manufactured to assure that only 100% solids are used. SC-1100 Fast Set helps eliminate outgassing and bubbles. With its low vapor emission of <10 lbs, tests done using Anhydrous Calcium Chloride has shown that the product can be applied on concrete surfaces that were only poured seven days prior.

Eco-floor SC3300

box-imageA durable, tough, ceramic coating, Eco-Floor 3300 is engineered for concrete and metal floors requiring superior long-term chemical resistance such as aircraft hangars, service garage floors, driveways, and automotive showrooms. Resistant to gasoline, jet fuel, diesel fuel, and other petroleum products, Eco-Floor 3300 is the ideal choice for harsh industrial floor environments, chemical environments, and secondary containment areas. Lastly, extremely acidic chemical containers for various chemicals such as sulfur can last longer when lined with it.

Crystal Loc

box-imageThis water-based concrete penetrating sealer is specially formulated to waterproof, damp proof, seal, and keep the natural appearance and profile of Portland cement-based concrete, concrete blocks, mortar, gunnite, slabs, floors, subsurface vaults, basements, walls, roofs, pillars, pipe, sculpture, architectural structures, and statuary. Use Crystal Lok on concrete in any location where the seepage is not caused by cracking or other structural flaws.

Choosing The Correct Floor Coating

If you are a commercial business or manufacturer looking for a protective coating for your shop floor, you may be considering whether to use an. Contrary to what the general population believes, both products have distinct features and properties. Understanding these differences will help ensure you pick the best industrial floor coating for the job at hand.[/ImageWithContent]

Most industrial coatings can be bought as a two-part mixture, meaning you will be provided with the two of the main ingredients of the product separately. This type of coating is best whether you are using epoxy or polyurethane coating.

The Two Part Epoxy Advantage

One advantage of two-part floor coatings over ambient air-cured coating products is that they provide a stronger hold on surfaces. To understand how a two-part floor coating works, you first have to look at what is going on at the microscopic level of the floor surface.

Let us take a look at how this type of coating works by examining its effects on an existing old concrete floor that has been primed to be rebuffed with a new epoxy coating. When mixed and applied properly, the epoxy coating seeps into the porous concrete surface about 1/16th of an inch. The reason it is better to use two-part floor coatings is that the chemical reaction of the curing between the epoxy resin and hardening agent results to a stronger bond between it and the concrete surface.

{If you were to saw out a 1’x1’ section of a concrete floor coated with a two-part epoxy resin, you would see with the naked eye where the floor coating infused itself into the concrete about 1/16th of an inch. By cutting the concrete floor in half, one can observe how deep the two-part floor coating has penetrated the surface.} This deep penetration is the reason why most experts recommend it over other types of floor coatings.

However, you must be careful in buying epoxy or polyurethane-based floor coating as, although some manufacturers would claim that they can do just as well, you can only achieve the same results with two-part coatings. The problem with pre-mixed epoxy products is that, although they make your job a bit faster, they tend to lose the ability to chemically-bond with the surface as they no longer cure on the stop. It is undeniable that they will harden the surface, but you can assure that it cannot do it as well as two-part coatings can.

Polyurethane Coatings vs. Epoxy Floor Coatings

Epoxy-based coatings have been proven to provide better adhesion and chemical-proofing than polyurethane coatings. Both types of industrial floor coatings are resistant to abrasions and have relatively similar cure times. Polyurethane coatings, on the other hand, have been shown to display stronger anti-UV properties compared to epoxy based coating. However, this advantage comes with a major drawback. Surfaces applied with polyurethane coating are more prone to damage due to its softer character.

Because of their superior adhesion, water and chemical resistant properties, and resistance to gouging, epoxy floor coatings are the best choice for coating industrial floors, and commercial floors where heavy machinery is in use and durability is a concern.

Construction System Supply’s Eco-Floor industrial epoxy floor coatings are 100% solids and are the ideal types of two-part coatings that this article presents. Not only that, we’ve made sure to add in rubber additives to make your floors more shock and damage-resistant. You can rest assured that any surface you apply Construction System Supply’s floor coatings to will resist the strongest and most corrosive substances.

Let us help you decide on the perfect epoxy floor coating for your industrial needs by getting in touch with us through our website www.csscorp.net! Serving Jersey City NJ and surrounding areas!