Epoxy Floor Coatings Supply Leland, IL

Industrial Floor Coatings

To provide excellent anti-impact ability and resistance to wear and tear, we built our Eco-Floor solutions from 100% solids. Our formula includes a rubber additive and is created using Novolac Technology. Ideal for a wide variety of concrete and metal surfaces, these high-performance industrial and commercial epoxy floor coatings can be applied to damp surfaces and are resistant to gasoline, sewage, alkalis, and other corrosive substances. Several of our Eco-Floor products are FDA-approved for food-handling areas. We offer a wide variety of epoxy-based floor coating including industrial and commercial applications.

Great For Garage Floors

Anti-corrosive epoxy coatings can effectively protect any surface such as:

Before:

Constructions Systems Supply Industrial Floor Coatings epoxy_floor_before_rsz

After:

Constructions Systems Supply Industrial Floor Coatings epoxy_floor_after_rsz
  • Airplane hangars, automotive showrooms, garage floors, and service bays
  • Food processing plants, Supermarkets, food service areas
  • Warehouses
  • Breweries
  • Tank liners (for solutions up to 98% sulphuric acid)
  • All manufacturing and industrial facility floors, including areas with high-traffic and heavy equipment such as forklifts

Repair Grout and Eco-floor 1500 Coating

box-imageThis quick setting epoxy-based floor coating is not only affordable, Eco-Floor 1500 has also been proven to exhibit high UV stability, excellent tensile, elongation, and compressive strength. Furthermore, it can also provide an impressive impact and wear resistance property due to its 100% solids polymer composition. It can be applied to a wide range of surfaces such as food processing plants, garages, showrooms, and believe it or not, even airplane hangars. The clear option is an excellent topcoat for stained concrete. Lastly, its sole distributor and manufacturer, Construction Systems Supply, has acquired a food-grade accreditation from no less than the FDA.

SC-1100

box-imageThis pure solid low viscosity primer is a quick setting concrete sealer. Applying concrete sealers during winter and cold weather can reduce the effectiveness of the product; hence, we formulated SC-1100 to address exactly that product by increasing its cure rate. SC-1100 Fast Set is a 100% solids, low viscosity hybrid Novolac epoxy primers designed for deep penetration and sealing of concrete surfaces. This primer can reduce vapors that can cause bubbles on the concrete coating. SC-1100 Fast Set can be applied to green concrete as young as seven days based on ASTM F1869-10 with a moisture vapor emission of <10lbs.

Eco-floor SC3300

box-imageThis state-of-the-art ceramic coating is perfect for cement and metal floors thanks to its heavy-duty and tough formulation. It can protect any floor that receives intense amounts of stress and chemical spillage such as service garage floors, aircraft hangars, driveways, and automotive showrooms. Eco-floor SC3300 provides protection against corrosive materials such as gasoline, diesel and other petroleum products, thus making it suitable for industrial, chemical and secondary containment areas. In addition, this polymer coating serves as an excellent tank liner for solutions up to 98% sulphuric acid.

Crystal Loc

box-imageThis water-based concrete penetrating sealer is specially formulated to waterproof, damp proof, seal, and keep the natural appearance and profile of Portland cement-based concrete, concrete blocks, mortar, gunnite, slabs, floors, subsurface vaults, basements, walls, roofs, pillars, pipe, sculpture, architectural structures, and statuary. Crystal Loc works best on structures where post-construction damage is not due to engineering and construction flaws.

Choosing The Correct Floor Coating

Both epoxy-based and polyurethane-based floor coating are both used to protect surfaces. Hence, as a business owner or manufacturer, you are probably wondering which one is best for your shop floor. While epoxy coatings and polyurethane coatings are sometimes talked about interchangeably in online discussion forums, they are two different types of floor coatings with distinctly different properties. Understanding these differences will help ensure you pick the best industrial floor coating for the job at hand.[/ImageWithContent]

Regardless of whether you decide to go with an epoxy coating or a polyurethane coating, you’ll want to be sure the industrial coating you select is a two-part floor coating (meaning it is sold in two separate parts that must be mixed together).

The Two Part Epoxy Advantage

One advantage of two-part floor coatings over ambient air-cured coating products is that they provide a stronger hold on surfaces. The amazing properties of two-part floor coating can only be understood by diving into how its molecules work.

Consider the example of an existing aged concrete floor that has been prepped to receive a new epoxy floor coating. If used correctly, the epoxy coating can be expected to penetrate the concrete surface by as much as 1/16th of an inch. The chemical reaction caused by mixing the epoxy resin (part 1) with the hardening agent (part 2) results in a curing process that hardens the coating and “welds” it to the concrete floor.

{If you were to saw out a 1’x1’ section of a concrete floor coated with a two-part epoxy resin, you would see with the naked eye where the floor coating infused itself into the concrete about 1/16th of an inch. By cutting the concrete floor in half, one can observe how deep the two-part floor coating has penetrated the surface.} This is why two-part industrial epoxy coatings work so well.

However, you must be careful in buying epoxy or polyurethane-based floor coating as, although some manufacturers would claim that they can do just as well, you can only achieve the same results with two-part coatings. One-step epoxy coating and paint products contain the equivalent of pre-cured epoxy, and lack the activating agents needed to form a chemical bond with the substrate. It is undeniable that they will harden the surface, but you can assure that it cannot do it as well as two-part coatings can.

Polyurethane Coatings vs. Epoxy Floor Coatings

Epoxy-based coatings have been proven to provide better adhesion and chemical-proofing than polyurethane coatings. Nevertheless, both products can turn any surface scratch-proof in the same span of waiting time. While polyurethane coatings offer a higher resistance to UV lighting, their softer nature makes them more prone to gouging than epoxy floor coatings.

Because of their superior adhesion, water and chemical resistant properties, and resistance to gouging, epoxy floor coatings are the best choice for coating industrial floors, and commercial floors where heavy machinery is in use and durability is a concern.

Construction System Supply’s Eco-Floor industrial epoxy floor coatings are 100% solids and are the ideal types of two-part coatings that this article presents. Not only that, we’ve made sure to add in rubber additives to make your floors more shock and damage-resistant. These high-performance coatings are resistant to alkalis, gasoline, and other corrosive substances.

Contact Construction Systems Supply today for assistance in selecting the best epoxy floor coating for your industrial flooring needs! www.csscorp.net Serving Leland IL and surrounding areas!