Epoxy Floor Coatings Supply Norway, ME

Industrial Floor Coatings

To provide excellent anti-impact ability and resistance to wear and tear, we built our Eco-Floor solutions from 100% solids. Our formula includes a rubber additive and is created using Novolac Technology. Eco-Floor all-purpose coatings can effectively weather-proof and chemical-proof any surface. It can protect any metal or concrete surfaces against corrosive substances such as gasoline, alkalis, and sewage. Several of our Eco-Floor products are FDA-approved for food-handling areas. Our service area includes Industrial and Commercial Epoxy Floor Coating.

Great For Garage Floors

Anti-corrosive epoxy coatings can effectively protect any surface such as:

Before:

Constructions Systems Supply Industrial Floor Coatings epoxy_floor_before_rsz

After:

Constructions Systems Supply Industrial Floor Coatings epoxy_floor_after_rsz
  • Service bays, garage floors, automotive showrooms, and airplane hangars
  • Supermarkets, food service areas, food processing plants
  • Warehouses
  • Breweries
  • Tank liners (for solutions up to 98% sulphuric acid)
  • Any manufacturing and industrial areas, where there is high traffic for heavy machinery such as forklifts.

Eco-floor 1500 Coating and Repair Grout

box-imageAn economical, fast-set hybrid epoxy floor coating with good UV stability, this 100% solids polymer offers great impact and wear resistance and excellent compressive strength, tensile, and elongation. Eco-Floor 1500 is ideal for concrete floor coatings for kitchens, food processing plants, showrooms, supermarkets, garages, airplane hangars, and more. The clear option is an excellent topcoat for stained concrete. Lastly, its sole distributor and manufacturer, Construction Systems Supply, has acquired a food-grade accreditation from no less than the FDA.

SC-1100

box-imageThis pure solid low viscosity primer is a quick setting concrete sealer. Applying concrete sealers during winter and cold weather can reduce the effectiveness of the product; hence, we formulated SC-1100 to address exactly that product by increasing its cure rate. SC-1100 Fast Set is a 100% solids, low viscosity hybrid Novolac epoxy primers designed for deep penetration and sealing of concrete surfaces. This primer can reduce vapors that can cause bubbles on the concrete coating. With its low vapor emission of <10 lbs, tests done using Anhydrous Calcium Chloride has shown that the product can be applied on concrete surfaces that were only poured seven days prior.

Eco-floor SC3300

box-imageThis state-of-the-art ceramic coating is perfect for cement and metal floors thanks to its heavy-duty and tough formulation. It can protect any floor that receives intense amounts of stress and chemical spillage such as service garage floors, aircraft hangars, driveways, and automotive showrooms. Resistant to gasoline, jet fuel, diesel fuel, and other petroleum products, Eco-Floor 3300 is the ideal choice for harsh industrial floor environments, chemical environments, and secondary containment areas. In addition, this polymer coating serves as an excellent tank liner for solutions up to 98% sulphuric acid.

Crystal Loc

box-imageThis water-based concrete penetrating sealer is specially formulated to waterproof, damp proof, seal, and keep the natural appearance and profile of Portland cement-based concrete, concrete blocks, mortar, gunnite, slabs, floors, subsurface vaults, basements, walls, roofs, pillars, pipe, sculpture, architectural structures, and statuary. Crystal Loc works best on structures where post-construction damage is not due to engineering and construction flaws.

Selecting the Best Industrial Floor Coating

If you are a commercial business or manufacturer looking for a protective coating for your shop floor, you may be considering whether to use an. While epoxy coatings and polyurethane coatings are sometimes talked about interchangeably in online discussion forums, they are two different types of floor coatings with distinctly different properties. Understanding these differences will help ensure you pick the best industrial floor coating for the job at hand.[/ImageWithContent]

Most industrial coatings can be bought as a two-part mixture, meaning you will be provided with the two of the main ingredients of the product separately. This type of coating is best whether you are using epoxy or polyurethane coating.

The Two Part Epoxy Advantage

One advantage of two-part floor coatings over ambient air-cured coating products is that they provide a stronger hold on surfaces. To understand how a two-part floor coating works, you first have to look at what is going on at the microscopic level of the floor surface.

Let us take a look at how this type of coating works by examining its effects on an existing old concrete floor that has been primed to be rebuffed with a new epoxy coating. If used correctly, the epoxy coating can be expected to penetrate the concrete surface by as much as 1/16th of an inch. The reason it is better to use two-part floor coatings is that the chemical reaction of the curing between the epoxy resin and hardening agent results to a stronger bond between it and the concrete surface.

{If you were to saw out a 1’x1’ section of a concrete floor coated with a two-part epoxy resin, you would see with the naked eye where the floor coating infused itself into the concrete about 1/16th of an inch. By cutting the concrete floor in half, one can observe how deep the two-part floor coating has penetrated the surface.} This deep penetration is the reason why most experts recommend it over other types of floor coatings.

However, you must be careful in buying epoxy or polyurethane-based floor coating as, although some manufacturers would claim that they can do just as well, you can only achieve the same results with two-part coatings. One-step epoxy coating and paint products contain the equivalent of pre-cured epoxy, and lack the activating agents needed to form a chemical bond with the substrate. It is undeniable that they will harden the surface, but you can assure that it cannot do it as well as two-part coatings can.

Epoxy Floor Coatings vs. Polyurethane Coatings

In general, epoxy floor coatings offer better adhesion and chemical resistant properties than polyurethane coatings. Nevertheless, both products can turn any surface scratch-proof in the same span of waiting time. Polyurethane coatings, on the other hand, have been shown to display stronger anti-UV properties compared to epoxy based coating. However, this advantage comes with a major drawback. Surfaces applied with polyurethane coating are more prone to damage due to its softer character.

Because of their superior adhesion, water and chemical resistant properties, and resistance to gouging, epoxy floor coatings are the best choice for coating industrial floors, and commercial floors where heavy machinery is in use and durability is a concern.

Our heavy-duty industrial epoxy floor coating is not only 100% solid-based but possesses all the benefits of two-parts coating that we have mentioned in this article. Not only that, we’ve made sure to add in rubber additives to make your floors more shock and damage-resistant. You can rest assured that any surface you apply Construction System Supply’s floor coatings to will resist the strongest and most corrosive substances.

Let us help you decide on the perfect epoxy floor coating for your industrial needs by getting in touch with us through our website www.csscorp.net! Serving Norway ME and surrounding areas!