Epoxy Floor Coatings Supply Oak Brook, IL

Industrial Floor Coatings

Built on the Novolac technology, our Eco-Floor products are 100% solids and formulated with a rubber additive, which provides outstanding impact resistance and wear resistance. Eco-Floor all-purpose coatings can effectively weather-proof and chemical-proof any surface. It can protect any metal or concrete surfaces against corrosive substances such as gasoline, alkalis, and sewage. Several of our Eco-Floor products are FDA-approved for food-handling areas. We offer a wide variety of epoxy-based floor coating including industrial and commercial applications.

Great For Garage Floors

Example applications for anti-corrosive epoxy coatings:

Before:

Constructions Systems Supply Industrial Floor Coatings epoxy_floor_before_rsz

After:

Constructions Systems Supply Industrial Floor Coatings epoxy_floor_after_rsz
  • Airplane hangars, automotive showrooms, garage floors, and service bays
  • Food processing plants, Supermarkets, food service areas
  • Warehouses
  • Breweries
  • Tank liners (for solutions up to 98% sulphuric acid)
  • Any manufacturing and industrial areas, where there is high traffic for heavy machinery such as forklifts.

Repair Grout and Eco-floor 1500 Coating

box-imageThis quick setting epoxy-based floor coating is not only affordable, Eco-Floor 1500 has also been proven to exhibit high UV stability, excellent tensile, elongation, and compressive strength. Furthermore, it can also provide an impressive impact and wear resistance property due to its 100% solids polymer composition. It can be applied to a wide range of surfaces such as food processing plants, garages, showrooms, and believe it or not, even airplane hangars. Stained concrete can also be protected from the elements without losing their vibrant colors with Eco-floor 1500’s colorless variety. Lastly, its sole distributor and manufacturer, Construction Systems Supply, has acquired a food-grade accreditation from no less than the FDA.

SC-1100

box-imageThis pure solid low viscosity primer is a quick setting concrete sealer. Applying concrete sealers during winter and cold weather can reduce the effectiveness of the product; hence, we formulated SC-1100 to address exactly that product by increasing its cure rate. SC-1100 Fast Set is a 100% solids, low viscosity hybrid Novolac epoxy primers designed for deep penetration and sealing of concrete surfaces. This primer can reduce vapors that can cause bubbles on the concrete coating. SC-1100 Fast Set can be applied to green concrete as young as seven days based on ASTM F1869-10 with a moisture vapor emission of <10lbs.

Eco-floor SC3300

box-imageA durable, tough, ceramic coating, Eco-Floor 3300 is engineered for concrete and metal floors requiring superior long-term chemical resistance such as aircraft hangars, service garage floors, driveways, and automotive showrooms. Eco-floor SC3300 provides protection against corrosive materials such as gasoline, diesel and other petroleum products, thus making it suitable for industrial, chemical and secondary containment areas. In addition, this polymer coating serves as an excellent tank liner for solutions up to 98% sulphuric acid.

Crystal Loc

box-imageThis water-based concrete penetrating sealer is specially formulated to waterproof, damp proof, seal, and keep the natural appearance and profile of Portland cement-based concrete, concrete blocks, mortar, gunnite, slabs, floors, subsurface vaults, basements, walls, roofs, pillars, pipe, sculpture, architectural structures, and statuary. Crystal Loc works best on structures where post-construction damage is not due to engineering and construction flaws.

Choosing The Correct Floor Coating

If you are a commercial business or manufacturer looking for a protective coating for your shop floor, you may be considering whether to use an. While epoxy coatings and polyurethane coatings are sometimes talked about interchangeably in online discussion forums, they are two different types of floor coatings with distinctly different properties. Hence, each application may require a particular type of floor coating. The only way for you to decide which one is more suitable for your project is by knowing and understanding these variations.[/ImageWithContent]

Regardless of whether you decide to go with an epoxy coating or a polyurethane coating, you’ll want to be sure the industrial coating you select is a two-part floor coating (meaning it is sold in two separate parts that must be mixed together).

The Two Part Epoxy Advantage

Two-part floor coatings have a distinct advantage over ambient air-cured coating products, in that they offer superior bonding characteristics. To understand how a two-part floor coating works, you first have to look at what is going on at the microscopic level of the floor surface.

Let us take a look at how this type of coating works by examining its effects on an existing old concrete floor that has been primed to be rebuffed with a new epoxy coating. If used correctly, the epoxy coating can be expected to penetrate the concrete surface by as much as 1/16th of an inch. The chemical reaction caused by mixing the epoxy resin (part 1) with the hardening agent (part 2) results in a curing process that hardens the coating and “welds” it to the concrete floor.

{If you were to saw out a 1’x1’ section of a concrete floor coated with a two-part epoxy resin, you would see with the naked eye where the floor coating infused itself into the concrete about 1/16th of an inch. By cutting the concrete floor in half, one can observe how deep the two-part floor coating has penetrated the surface.} This is why two-part industrial epoxy coatings work so well.

However, you must be careful in buying epoxy or polyurethane-based floor coating as, although some manufacturers would claim that they can do just as well, you can only achieve the same results with two-part coatings. One-step epoxy coating and paint products contain the equivalent of pre-cured epoxy, and lack the activating agents needed to form a chemical bond with the substrate. They may make a surface harder, but will not be as durable as a two-part floor coating a system.

Epoxy Floor Coatings vs. Polyurethane Coatings

Epoxy-based coatings have been proven to provide better adhesion and chemical-proofing than polyurethane coatings. Nevertheless, both products can turn any surface scratch-proof in the same span of waiting time. Polyurethane coatings, on the other hand, have been shown to display stronger anti-UV properties compared to epoxy based coating. However, this advantage comes with a major drawback. Surfaces applied with polyurethane coating are more prone to damage due to its softer character.

Hence, with its stronger binding, weather-proofing, and damage-proofing properties, epoxy-based floor coatings are a better alternative for industrial and commercial floors that receive heavy beatings on a daily basis.

Our heavy-duty industrial epoxy floor coating is not only 100% solid-based but possesses all the benefits of two-parts coating that we have mentioned in this article. Not only that, we’ve made sure to add in rubber additives to make your floors more shock and damage-resistant. You can rest assured that any surface you apply Construction System Supply’s floor coatings to will resist the strongest and most corrosive substances.

Let us help you decide on the perfect epoxy floor coating for your industrial needs by getting in touch with us through our website www.csscorp.net! Serving Oak Brook IL and surrounding areas!