Epoxy Floor Coatings Supply Palm Desert, CA

Industrial Floor Coatings

To provide excellent anti-impact ability and resistance to wear and tear, we built our Eco-Floor solutions from 100% solids. Our formula includes a rubber additive and is created using Novolac Technology. Eco-Floor all-purpose coatings can effectively weather-proof and chemical-proof any surface. It can protect any metal or concrete surfaces against corrosive substances such as gasoline, alkalis, and sewage. The Food and Drug Administration has deemed many of our products to be food –grade. This accreditation means that our customers can apply it even in areas where food products are handled. Our service area includes Industrial and Commercial Epoxy Floor Coating.

Great For Garage Floors

Example applications for anti-corrosive epoxy coatings:

Before:

Constructions Systems Supply Industrial Floor Coatings epoxy_floor_before_rsz

After:

Constructions Systems Supply Industrial Floor Coatings epoxy_floor_after_rsz
  • Airplane hangars, automotive showrooms, garage floors, and service bays
  • Food processing plants, Supermarkets, food service areas
  • Warehouses
  • Breweries
  • Tank liners (for solutions up to 98% sulphuric acid)
  • Any manufacturing and industrial areas, where there is high traffic for heavy machinery such as forklifts.

Eco-floor 1500 Coating and Repair Grout

box-imageAn economical, fast-set hybrid epoxy floor coating with good UV stability, this 100% solids polymer offers great impact and wear resistance and excellent compressive strength, tensile, and elongation. It can be applied to a wide range of surfaces such as food processing plants, garages, showrooms, and believe it or not, even airplane hangars. Stained concrete can also be protected from the elements without losing their vibrant colors with Eco-floor 1500’s colorless variety. Lastly, its sole distributor and manufacturer, Construction Systems Supply, has acquired a food-grade accreditation from no less than the FDA.

SC-1100

box-imageThis pure solid low viscosity primer is a quick setting concrete sealer. Its fast cure rate makes it ideal for cold weather applications. SC-1100 Fast Set is a 100% solids, low viscosity hybrid Novolac epoxy primers designed for deep penetration and sealing of concrete surfaces. This primer can reduce vapors that can cause bubbles on the concrete coating. SC-1100 Fast Set can be applied to green concrete as young as seven days based on ASTM F1869-10 with a moisture vapor emission of <10lbs.

Eco-floor SC3300

box-imageA durable, tough, ceramic coating, Eco-Floor 3300 is engineered for concrete and metal floors requiring superior long-term chemical resistance such as aircraft hangars, service garage floors, driveways, and automotive showrooms. Eco-floor SC3300 provides protection against corrosive materials such as gasoline, diesel and other petroleum products, thus making it suitable for industrial, chemical and secondary containment areas. Lastly, extremely acidic chemical containers for various chemicals such as sulfur can last longer when lined with it.

Crystal Loc

box-imageCrystal loc was made to help protect different types of concrete-based structures such as cement blocks, concrete slabs, underground vaults, basements, roofs, walls, pillars, sculptures, and more. Its deep penetration water-based formulation helps damage-proof any concrete surface without diminishing its natural look. Crystal Loc works best on structures where post-construction damage is not due to engineering and construction flaws.

Selecting the Best Industrial Floor Coating

If you are a commercial business or manufacturer looking for a protective coating for your shop floor, you may be considering whether to use an. While epoxy coatings and polyurethane coatings are sometimes talked about interchangeably in online discussion forums, they are two different types of floor coatings with distinctly different properties. Hence, each application may require a particular type of floor coating. The only way for you to decide which one is more suitable for your project is by knowing and understanding these variations.[/ImageWithContent]

Regardless of whether you decide to go with an epoxy coating or a polyurethane coating, you’ll want to be sure the industrial coating you select is a two-part floor coating (meaning it is sold in two separate parts that must be mixed together).

The Two Part Epoxy Advantage

One advantage of two-part floor coatings over ambient air-cured coating products is that they provide a stronger hold on surfaces. The amazing properties of two-part floor coating can only be understood by diving into how its molecules work.

Consider the example of an existing aged concrete floor that has been prepped to receive a new epoxy floor coating. When mixed and applied properly, the epoxy coating seeps into the porous concrete surface about 1/16th of an inch. The chemical reaction caused by mixing the epoxy resin (part 1) with the hardening agent (part 2) results in a curing process that hardens the coating and “welds” it to the concrete floor.

{If you were to saw out a 1’x1’ section of a concrete floor coated with a two-part epoxy resin, you would see with the naked eye where the floor coating infused itself into the concrete about 1/16th of an inch. By cutting the concrete floor in half, one can observe how deep the two-part floor coating has penetrated the surface.} This deep penetration is the reason why most experts recommend it over other types of floor coatings.

However, you must be careful in buying epoxy or polyurethane-based floor coating as, although some manufacturers would claim that they can do just as well, you can only achieve the same results with two-part coatings. The problem with pre-mixed epoxy products is that, although they make your job a bit faster, they tend to lose the ability to chemically-bond with the surface as they no longer cure on the stop. It is undeniable that they will harden the surface, but you can assure that it cannot do it as well as two-part coatings can.

Polyurethane Coatings vs. Epoxy Floor Coatings

Epoxy-based coatings have been proven to provide better adhesion and chemical-proofing than polyurethane coatings. Nevertheless, both products can turn any surface scratch-proof in the same span of waiting time. Polyurethane coatings, on the other hand, have been shown to display stronger anti-UV properties compared to epoxy based coating. However, this advantage comes with a major drawback. Surfaces applied with polyurethane coating are more prone to damage due to its softer character.

Because of their superior adhesion, water and chemical resistant properties, and resistance to gouging, epoxy floor coatings are the best choice for coating industrial floors, and commercial floors where heavy machinery is in use and durability is a concern.

Construction System Supply’s Eco-Floor industrial epoxy floor coatings are 100% solids and are the ideal types of two-part coatings that this article presents. Not only that, we’ve made sure to add in rubber additives to make your floors more shock and damage-resistant. These high-performance coatings are resistant to alkalis, gasoline, and other corrosive substances.

Let us help you decide on the perfect epoxy floor coating for your industrial needs by getting in touch with us through our website www.csscorp.net! Serving Palm Desert CA and surrounding areas!