Epoxy Floor Coatings Supply Port Arthur, TX

Industrial Floor Coatings

Built on the Novolac technology, our Eco-Floor products are 100% solids and formulated with a rubber additive, which provides outstanding impact resistance and wear resistance. Eco-Floor all-purpose coatings can effectively weather-proof and chemical-proof any surface. It can protect any metal or concrete surfaces against corrosive substances such as gasoline, alkalis, and sewage. The Food and Drug Administration has deemed many of our products to be food –grade. This accreditation means that our customers can apply it even in areas where food products are handled. We offer a wide variety of epoxy-based floor coating including industrial and commercial applications.

Great For Garage Floors

Example applications for anti-corrosive epoxy coatings:

Before:

Constructions Systems Supply Industrial Floor Coatings epoxy_floor_before_rsz

After:

Constructions Systems Supply Industrial Floor Coatings epoxy_floor_after_rsz
  • Airplane hangars, automotive showrooms, garage floors, and service bays
  • Food processing plants, Supermarkets, food service areas
  • Warehouses
  • Breweries
  • Tank liners (for solutions up to 98% sulphuric acid)
  • All manufacturing and industrial facility floors, including areas with high-traffic and heavy equipment such as forklifts

Eco-floor 1500 Coating and Repair Grout

box-imageThis quick setting epoxy-based floor coating is not only affordable, Eco-Floor 1500 has also been proven to exhibit high UV stability, excellent tensile, elongation, and compressive strength. Furthermore, it can also provide an impressive impact and wear resistance property due to its 100% solids polymer composition. It can be applied to a wide range of surfaces such as food processing plants, garages, showrooms, and believe it or not, even airplane hangars. Stained concrete can also be protected from the elements without losing their vibrant colors with Eco-floor 1500’s colorless variety. Lastly, its sole distributor and manufacturer, Construction Systems Supply, has acquired a food-grade accreditation from no less than the FDA.

SC-1100

box-imageThis pure solid low viscosity primer is a quick setting concrete sealer. Applying concrete sealers during winter and cold weather can reduce the effectiveness of the product; hence, we formulated SC-1100 to address exactly that product by increasing its cure rate. SC-1100 Fast Set is a 100% solids, low viscosity hybrid Novolac epoxy primers designed for deep penetration and sealing of concrete surfaces. SC-1100 Fast Set helps eliminate outgassing and bubbles. SC-1100 Fast Set can be applied to green concrete as young as seven days based on ASTM F1869-10 with a moisture vapor emission of <10lbs.

Eco-floor SC3300

box-imageA durable, tough, ceramic coating, Eco-Floor 3300 is engineered for concrete and metal floors requiring superior long-term chemical resistance such as aircraft hangars, service garage floors, driveways, and automotive showrooms. Eco-floor SC3300 provides protection against corrosive materials such as gasoline, diesel and other petroleum products, thus making it suitable for industrial, chemical and secondary containment areas. In addition, this polymer coating serves as an excellent tank liner for solutions up to 98% sulphuric acid.

Crystal Loc

box-imageThis water-based concrete penetrating sealer is specially formulated to waterproof, damp proof, seal, and keep the natural appearance and profile of Portland cement-based concrete, concrete blocks, mortar, gunnite, slabs, floors, subsurface vaults, basements, walls, roofs, pillars, pipe, sculpture, architectural structures, and statuary. Crystal Loc works best on structures where post-construction damage is not due to engineering and construction flaws.

Choosing The Correct Floor Coating

If you are a commercial business or manufacturer looking for a protective coating for your shop floor, you may be considering whether to use an. Contrary to what the general population believes, both products have distinct features and properties. Hence, each application may require a particular type of floor coating. The only way for you to decide which one is more suitable for your project is by knowing and understanding these variations.[/ImageWithContent]

Regardless of whether you decide to go with an epoxy coating or a polyurethane coating, you’ll want to be sure the industrial coating you select is a two-part floor coating (meaning it is sold in two separate parts that must be mixed together).

The Two Part Epoxy Advantage

One advantage of two-part floor coatings over ambient air-cured coating products is that they provide a stronger hold on surfaces. To understand how a two-part floor coating works, you first have to look at what is going on at the microscopic level of the floor surface.

Let us take a look at how this type of coating works by examining its effects on an existing old concrete floor that has been primed to be rebuffed with a new epoxy coating. When mixed and applied properly, the epoxy coating seeps into the porous concrete surface about 1/16th of an inch. The chemical reaction caused by mixing the epoxy resin (part 1) with the hardening agent (part 2) results in a curing process that hardens the coating and “welds” it to the concrete floor.

{If you were to saw out a 1’x1’ section of a concrete floor coated with a two-part epoxy resin, you would see with the naked eye where the floor coating infused itself into the concrete about 1/16th of an inch. By cutting the concrete floor in half, one can observe how deep the two-part floor coating has penetrated the surface.} This deep penetration is the reason why most experts recommend it over other types of floor coatings.

Keep in mind that while many floor coating paints and products may claim to contain, if they are not two-part products you will not get the best results. One-step epoxy coating and paint products contain the equivalent of pre-cured epoxy, and lack the activating agents needed to form a chemical bond with the substrate. It is undeniable that they will harden the surface, but you can assure that it cannot do it as well as two-part coatings can.

Polyurethane Coatings vs. Epoxy Floor Coatings

In general, epoxy floor coatings offer better adhesion and chemical resistant properties than polyurethane coatings. Nevertheless, both products can turn any surface scratch-proof in the same span of waiting time. While polyurethane coatings offer a higher resistance to UV lighting, their softer nature makes them more prone to gouging than epoxy floor coatings.

Hence, with its stronger binding, weather-proofing, and damage-proofing properties, epoxy-based floor coatings are a better alternative for industrial and commercial floors that receive heavy beatings on a daily basis.

Construction System Supply’s Eco-Floor industrial epoxy floor coatings are 100% solids and are the ideal types of two-part coatings that this article presents. Not only that, we’ve made sure to add in rubber additives to make your floors more shock and damage-resistant. These high-performance coatings are resistant to alkalis, gasoline, and other corrosive substances.

Contact Construction Systems Supply today for assistance in selecting the best epoxy floor coating for your industrial flooring needs! www.csscorp.net Serving Port Arthur TX and surrounding areas!