Epoxy Floor Coatings Supply Tyler, TX

Industrial Floor Coatings

To provide excellent anti-impact ability and resistance to wear and tear, we built our Eco-Floor solutions from 100% solids. Our formula includes a rubber additive and is created using Novolac Technology. Eco-Floor all-purpose coatings can effectively weather-proof and chemical-proof any surface. It can protect any metal or concrete surfaces against corrosive substances such as gasoline, alkalis, and sewage. The Food and Drug Administration has deemed many of our products to be food –grade. This accreditation means that our customers can apply it even in areas where food products are handled. We offer a wide variety of epoxy-based floor coating including industrial and commercial applications.

Great For Garage Floors

Example applications for anti-corrosive epoxy coatings:

Before:

Constructions Systems Supply Industrial Floor Coatings epoxy_floor_before_rsz

After:

Constructions Systems Supply Industrial Floor Coatings epoxy_floor_after_rsz
  • Service bays, garage floors, automotive showrooms, and airplane hangars
  • Food processing plants, Supermarkets, food service areas
  • Warehouses
  • Breweries
  • Tank liners (for solutions up to 98% sulphuric acid)
  • All manufacturing and industrial facility floors, including areas with high-traffic and heavy equipment such as forklifts

Eco-floor 1500 Coating and Repair Grout

box-imageAn economical, fast-set hybrid epoxy floor coating with good UV stability, this 100% solids polymer offers great impact and wear resistance and excellent compressive strength, tensile, and elongation. It can be applied to a wide range of surfaces such as food processing plants, garages, showrooms, and believe it or not, even airplane hangars. Stained concrete can also be protected from the elements without losing their vibrant colors with Eco-floor 1500’s colorless variety. Lastly, its sole distributor and manufacturer, Construction Systems Supply, has acquired a food-grade accreditation from no less than the FDA.

SC-1100

box-imageSC-1100 Fast Set is a 100% solids low viscosity primer designed for sealing concrete. Applying concrete sealers during winter and cold weather can reduce the effectiveness of the product; hence, we formulated SC-1100 to address exactly that product by increasing its cure rate. SC-1100 Fast Set is a 100% solids, low viscosity hybrid Novolac epoxy primers designed for deep penetration and sealing of concrete surfaces. This primer can reduce vapors that can cause bubbles on the concrete coating. SC-1100 Fast Set can be applied to green concrete as young as seven days based on ASTM F1869-10 with a moisture vapor emission of <10lbs.

Eco-floor SC3300

box-imageThis state-of-the-art ceramic coating is perfect for cement and metal floors thanks to its heavy-duty and tough formulation. It can protect any floor that receives intense amounts of stress and chemical spillage such as service garage floors, aircraft hangars, driveways, and automotive showrooms. Resistant to gasoline, jet fuel, diesel fuel, and other petroleum products, Eco-Floor 3300 is the ideal choice for harsh industrial floor environments, chemical environments, and secondary containment areas. In addition, this polymer coating serves as an excellent tank liner for solutions up to 98% sulphuric acid.

Crystal Loc

box-imageCrystal loc was made to help protect different types of concrete-based structures such as cement blocks, concrete slabs, underground vaults, basements, roofs, walls, pillars, sculptures, and more. Its deep penetration water-based formulation helps damage-proof any concrete surface without diminishing its natural look. Use Crystal Lok on concrete in any location where the seepage is not caused by cracking or other structural flaws.

Choosing The Correct Floor Coating

If you are a commercial business or manufacturer looking for a protective coating for your shop floor, you may be considering whether to use an. Contrary to what the general population believes, both products have distinct features and properties. Hence, each application may require a particular type of floor coating. The only way for you to decide which one is more suitable for your project is by knowing and understanding these variations.[/ImageWithContent]

Regardless of whether you decide to go with an epoxy coating or a polyurethane coating, you’ll want to be sure the industrial coating you select is a two-part floor coating (meaning it is sold in two separate parts that must be mixed together).

The Two Part Epoxy Advantage

Two-part floor coatings have a distinct advantage over ambient air-cured coating products, in that they offer superior bonding characteristics. The amazing properties of two-part floor coating can only be understood by diving into how its molecules work.

Let us take a look at how this type of coating works by examining its effects on an existing old concrete floor that has been primed to be rebuffed with a new epoxy coating. When mixed and applied properly, the epoxy coating seeps into the porous concrete surface about 1/16th of an inch. The chemical reaction caused by mixing the epoxy resin (part 1) with the hardening agent (part 2) results in a curing process that hardens the coating and “welds” it to the concrete floor.

{If you were to saw out a 1’x1’ section of a concrete floor coated with a two-part epoxy resin, you would see with the naked eye where the floor coating infused itself into the concrete about 1/16th of an inch. By cutting the concrete floor in half, one can observe how deep the two-part floor coating has penetrated the surface.} This is why two-part industrial epoxy coatings work so well.

Keep in mind that while many floor coating paints and products may claim to contain, if they are not two-part products you will not get the best results. One-step epoxy coating and paint products contain the equivalent of pre-cured epoxy, and lack the activating agents needed to form a chemical bond with the substrate. They may make a surface harder, but will not be as durable as a two-part floor coating a system.

Polyurethane Coatings vs. Epoxy Floor Coatings

Epoxy-based coatings have been proven to provide better adhesion and chemical-proofing than polyurethane coatings. Nevertheless, both products can turn any surface scratch-proof in the same span of waiting time. While polyurethane coatings offer a higher resistance to UV lighting, their softer nature makes them more prone to gouging than epoxy floor coatings.

Hence, with its stronger binding, weather-proofing, and damage-proofing properties, epoxy-based floor coatings are a better alternative for industrial and commercial floors that receive heavy beatings on a daily basis.

Our heavy-duty industrial epoxy floor coating is not only 100% solid-based but possesses all the benefits of two-parts coating that we have mentioned in this article. Not only that, we’ve made sure to add in rubber additives to make your floors more shock and damage-resistant. These high-performance coatings are resistant to alkalis, gasoline, and other corrosive substances.

Let us help you decide on the perfect epoxy floor coating for your industrial needs by getting in touch with us through our website www.csscorp.net! Serving Tyler TX and surrounding areas!