Epoxy Floor Coatings Supply Woodstock, VA

Industrial Floor Coatings

To provide excellent anti-impact ability and resistance to wear and tear, we built our Eco-Floor solutions from 100% solids. Our formula includes a rubber additive and is created using Novolac Technology. Eco-Floor all-purpose coatings can effectively weather-proof and chemical-proof any surface. It can protect any metal or concrete surfaces against corrosive substances such as gasoline, alkalis, and sewage. Several of our Eco-Floor products are FDA-approved for food-handling areas. Our service area includes Industrial and Commercial Epoxy Floor Coating.

Great For Garage Floors

Anti-corrosive epoxy coatings can effectively protect any surface such as:

Before:

Constructions Systems Supply Industrial Floor Coatings epoxy_floor_before_rsz

After:

Constructions Systems Supply Industrial Floor Coatings epoxy_floor_after_rsz
  • Service bays, garage floors, automotive showrooms, and airplane hangars
  • Supermarkets, food service areas, food processing plants
  • Warehouses
  • Breweries
  • Tank liners (for solutions up to 98% sulphuric acid)
  • All manufacturing and industrial facility floors, including areas with high-traffic and heavy equipment such as forklifts

Repair Grout and Eco-floor 1500 Coating

box-imageAn economical, fast-set hybrid epoxy floor coating with good UV stability, this 100% solids polymer offers great impact and wear resistance and excellent compressive strength, tensile, and elongation. It can be applied to a wide range of surfaces such as food processing plants, garages, showrooms, and believe it or not, even airplane hangars. The clear option is an excellent topcoat for stained concrete. FDA-approved for food-handling areas. Mfg., distributed and sold exclusively by Construction Systems Supply.

SC-1100

box-imageSC-1100 Fast Set is a 100% solids low viscosity primer designed for sealing concrete. Applying concrete sealers during winter and cold weather can reduce the effectiveness of the product; hence, we formulated SC-1100 to address exactly that product by increasing its cure rate. SC-1100 Fast Set has been created with deep penetration for concrete surfaces in mind. Thus, to make it one of the best low-viscosity hybrid Novolac epoxy primers, it is carefully manufactured to assure that only 100% solids are used. SC-1100 Fast Set helps eliminate outgassing and bubbles. With its low vapor emission of <10 lbs, tests done using Anhydrous Calcium Chloride has shown that the product can be applied on concrete surfaces that were only poured seven days prior.

Eco-floor SC3300

box-imageThis state-of-the-art ceramic coating is perfect for cement and metal floors thanks to its heavy-duty and tough formulation. It can protect any floor that receives intense amounts of stress and chemical spillage such as service garage floors, aircraft hangars, driveways, and automotive showrooms. Eco-floor SC3300 provides protection against corrosive materials such as gasoline, diesel and other petroleum products, thus making it suitable for industrial, chemical and secondary containment areas. In addition, this polymer coating serves as an excellent tank liner for solutions up to 98% sulphuric acid.

Crystal Loc

box-imageThis water-based concrete penetrating sealer is specially formulated to waterproof, damp proof, seal, and keep the natural appearance and profile of Portland cement-based concrete, concrete blocks, mortar, gunnite, slabs, floors, subsurface vaults, basements, walls, roofs, pillars, pipe, sculpture, architectural structures, and statuary. Crystal Loc works best on structures where post-construction damage is not due to engineering and construction flaws.

Selecting the Best Industrial Floor Coating

If you are a commercial business or manufacturer looking for a protective coating for your shop floor, you may be considering whether to use an. While epoxy coatings and polyurethane coatings are sometimes talked about interchangeably in online discussion forums, they are two different types of floor coatings with distinctly different properties. Understanding these differences will help ensure you pick the best industrial floor coating for the job at hand.[/ImageWithContent]

Most industrial coatings can be bought as a two-part mixture, meaning you will be provided with the two of the main ingredients of the product separately. This type of coating is best whether you are using epoxy or polyurethane coating.

The Two Part Epoxy Advantage

One advantage of two-part floor coatings over ambient air-cured coating products is that they provide a stronger hold on surfaces. The amazing properties of two-part floor coating can only be understood by diving into how its molecules work.

Let us take a look at how this type of coating works by examining its effects on an existing old concrete floor that has been primed to be rebuffed with a new epoxy coating. When mixed and applied properly, the epoxy coating seeps into the porous concrete surface about 1/16th of an inch. The chemical reaction caused by mixing the epoxy resin (part 1) with the hardening agent (part 2) results in a curing process that hardens the coating and “welds” it to the concrete floor.

{If you were to saw out a 1’x1’ section of a concrete floor coated with a two-part epoxy resin, you would see with the naked eye where the floor coating infused itself into the concrete about 1/16th of an inch. By cutting the concrete floor in half, one can observe how deep the two-part floor coating has penetrated the surface.} This is why two-part industrial epoxy coatings work so well.

However, you must be careful in buying epoxy or polyurethane-based floor coating as, although some manufacturers would claim that they can do just as well, you can only achieve the same results with two-part coatings. One-step epoxy coating and paint products contain the equivalent of pre-cured epoxy, and lack the activating agents needed to form a chemical bond with the substrate. It is undeniable that they will harden the surface, but you can assure that it cannot do it as well as two-part coatings can.

Polyurethane Coatings vs. Epoxy Floor Coatings

In general, epoxy floor coatings offer better adhesion and chemical resistant properties than polyurethane coatings. Nevertheless, both products can turn any surface scratch-proof in the same span of waiting time. While polyurethane coatings offer a higher resistance to UV lighting, their softer nature makes them more prone to gouging than epoxy floor coatings.

Because of their superior adhesion, water and chemical resistant properties, and resistance to gouging, epoxy floor coatings are the best choice for coating industrial floors, and commercial floors where heavy machinery is in use and durability is a concern.

Construction System Supply’s Eco-Floor industrial epoxy floor coatings are 100% solids and are the ideal types of two-part coatings that this article presents. They are formulated with rubber additives for added impact and wear resistance. These high-performance coatings are resistant to alkalis, gasoline, and other corrosive substances.

Contact Construction Systems Supply today for assistance in selecting the best epoxy floor coating for your industrial flooring needs! www.csscorp.net Serving Woodstock VA and surrounding areas!